Buy Now, Pay later with  – 0% Interest!

lightguru_header

GLEDOPTO E14 RGB Candle Color Bulb (Zigbee 3.0)

Model GL-B-001P
Vendor Gledopto
Description Zigbee 4W E12/E14 Bulb RGB+CCT (pro)
Exposes light (state, brightness, color_temp, color_temp_startup, color_xy, color_hs), effect, linkquality

Features:

  • Model: GL-B-001P
  • Material: Aluminium + PC
  • High-quality SMD LED Chips
  • Adopts High-grade PMMA Lens
  • Size: 103.5*37.5mm(H*Φ)(E12)/110*37.5mm(H*Φ)(E14)
  • Input Voltage: AC100-240V
  • Power: 4W
  • Luminous Flux: 250-300LM
  • 16 Million Colours Available
  • Colour Temp Adjustable From 2200-6500K
  • Brightness Adjustable From 1% To 100%
  • Compatible With ZigBee Hub
  • Smartphone APP Control
  • Voice Control
  • RF Remote Control
  • Works With Amazon Echo Plus
  • CRI: >80
  • Working Temp: -20℃-60℃

$36.00

3 payments at 0% interest with  
Available in when you proceed to Checkout page or Click here. 

For delivery of your products. Please find shipping option in Cart Checkout.

You can make your reservation order from us without paying a single cent until we confirm your order and stock availability.
A follow up call or WhatsApp message (within 1-2 Working days) to inform you of your order and advise you on the payment method.
All prices you see are NETT with NO mark up.
Order with confidence!

E14 illuminant compatible with ZigBee gateways such as Philips Hue®, Osram Lightify®, Ikea Tradfri®, Amazon Echo Plus

This new generation of ZigBee E14 bulbs work with the ZigBee 3.0 standard and are thus compatible with the most common gateways. You can adjust and mix different colors of RGB shades with this light source. 

In addition, the color temperature can be set between 2700 Kelvin and 6500 Kelvin. Depending on the ZigBee controller, using both techniques, you can set color saturation to use more color options (pastel colors).

  • Switch between multiple lighting modes with your choice.
  • Rich lamplight atmosphere, give you more pure and fresh sense, available in dimmer & night light mode options
  • Brightness and colour temperature dimmable & adjustable from warm white 3000K to cool/cold white 6500K
  • Customize your colourful life, 16 million color saturation changes, make life full of beauty
  • Home or Away lighting mode, to remote control the smart LED bulb even away from home, to ensure the safety of your home

Rainbow of colors

The color temperature of the light is from 2000k to 6500k (RGB+CCT). More than 16 million color choices and all of them are dimmable. You can easily set the color to suit your mood with dimmable brightness. Brighten up the room or create a relaxing environment by dimming the light. 

Installation

1.Turn off the Power.
2.Plug in the bulb.
3.Now you can connect it with the gateway.

Connection with Gateway:
1.Start the device searching on the ZigBee Light Link Gateway, it could take some time.
   If the Gateway does not find the device, switch off/on the gateway and try again or
3.The Gateway found your device and you can assign it to the different rooms/zones/groups.
4.Now you can use the device.

Reset
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

Link & unlink with 2.4GHZ RF Remote Control

How to Link

1. Within 3 seconds after power on, click the “on” button of the group to conduct code matching, and the LED lights turns green, indicating successful code matching.

2. Long press the “off” button of the remote control to enter the night light mode, and the brightness and colour can still be adjusted at this time.
3. Long press the small moon key to enter the 60 seconds delay shutdown state.
4. Long press M key to enter automatic mode.
 

How to unlink

1. If the LED is still connected to the ZigBee gateway, long press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current colour.
2. If the LED is not connected to the ZigBee gateway status, on press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times.

Link & unlink with 2.4GHZ RF Remote Control

How to Link

  1. Within 3 seconds after power on, click the “on” button of the group to conduct code matching, and the LED lights turns green, indicating successful code matching.
  2. Long press the “off” button of the remote control to enter the night light mode, and the brightness and colour can still be adjusted at this time.
  3. Long press the small moon key to enter the 60 seconds delay shutdown state.
  4. Long press M key to enter automatic mode.

How to unlink

  1. If the LED is still connected to the ZigBee gateway, long press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current colour.
  2. If the LED is not connected to the ZigBee gateway status, on press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times.

Click on the Whatsapp Icon to ask us any question!
Remember to indicate on the product you are enquiring about.

Categories , Tags , ,