Description
In this video, we teach you how to pair or re-pair an offline Touch Smart Switch.
Steps of pairing is as per the following
– “Press & Hold” the switch until it blink (meaning going into pairing mode)
– For 2 or 3 button switch, “Press & Hold” the left most switch. – Go back into the APP
– In the Zigbee Hub gateway, scroll to the button and click “Add sub-devices”
– In the pop up manual, click “LED is blinking”
And the APP will find the Zigbee devices to add on. If after pairing back the switch, the APP control is still no available or good.
Do turn off the MCB (or breaker) to the circuit and allow the switch to discharge to achieve a full hardware reset.
Here is a page that lists the products registered under the CLS.
The product’s registration ID is in the format: CSA/Date of Label Expiry in DDMMYY/Product ID number assigned by CSA. The validity of the label is the period for which the manufacturers will support the device with security updates, up to a maximum of a period of 3 years.
Products which have attained the Cybersecurity Label under the Transport and Communications Agency of Finland (Traficom) will be recognised as having met Level 3 of the Cybersecurity Labelling Scheme, and products with CLS Level 3 and above are recognised by Finland to have met their requirements. Products labelled by Traficom are listed at https://tietoturvamerkki.fi/en/products.
https://www.csa.gov.sg/-/media/Csa/Documents/CLS/Labelled-Products/CSA_U0001_Label_Details.pdf
Specification:
- Product Colour: White, Gold, Black,
- Model: HA-Z-RWS-1G (1 Gang), HA-Z-RWS-2G (2 Gang), HA-Z-RWS-3G (3 Gang)
- CLS Label: CSA/030324/U0001
- Gang: One (1), Two (2), Three (3)
- NO Neutral Required
- Rated Voltage: AC 100V – 240V
- Rated Load: 3W to 800W
- Wireless Type: Zigbee, IEEE802.15.4
- Operation Temperature: -20-45 deg
- Operation Humidity: <85% RH (Non-Condensing)
- Dimension: 86 x 86 x 34 (mm)