GLEDOPTO GU10 Bulb 4W RGB Color (Zigbee 3.0)

GLEDOPTO GU10 Bulb 4W RGB Color (Zigbee 3.0)

This RGB + CCT GU10 spot is ZigBee compatible and therefore an ideal light source for all smart home installations.

Product Type: Bulb
Socket: GU10
Colour: RGB Colour and 2700 – 6500K temperature
Control: Remote Control / ZigBee control
Voltage: 230 Volt
Angle of Light: 25°

Model No: GL-S-007P

Power: 4W

Voltage : 100-240V

Lifespan: 30000hrs

Max Diameter: 49.5mm

Max Length: 58mm

Color Temperature: RGB+CCT(2000-6500K)

Luminous Flux: 250LM-300LM

Luminous Efficiency: 90LM/W

CRI: >80

Beam Angle: 25°

$27.00

3 payments at 0% interest with Atome Logo 
Available in when you proceed to Checkout page or Click here. 

For delivery of your products. Please find shipping option in Cart Checkout.

To find out more about our shipping fees. Please read brief on Shipping Policy.

You can make your reservation order from us without paying a single cent until we confirm your order and stock availability.
A follow up call or WhatsApp message (within 1-2 Working days) to inform you of your order and advise you on the payment method.
All prices you see are NETT with NO mark up.
Order with confidence!

GU10 illuminant compatible with ZigBee gateways such as Philips Hue®, Osram Lightify®, Ikea Tradfri®, Amazon Echo Plus

ZigBee COMPATIBILITY: 
The led bulb works with ZigBee Light Link(ZLL) ZigBee3.0, compatible with Amazon Echo Plus or other brands gateways and Android iOS system.

16 MILLION COLORS CHANGING: 
Dimmable saturation control, the color temperature from 2000-6500K.  LED bulbs will memorised last colour setting after the power is switched off from the mains.

VOICE CONTROL: 
Works with Alexa Echo Plus, voice control your led bulbs by speaking to Amazon Alexa, you can turn on/off, change the color, dim/brighten the  RGB bulbs.

MULTI APPLICATIONS:
Timer function allows you to set lights bulbs turned on and off at specific time. Suitable for kitchen, bedroom, living room, hall, porch, pantry, wall light, stairs, giving you a special smart home.

9444561e 470c 4c6f 803c 4d4f32fb2c1f

b712e73b 0993 4077 bbde aaab6bd4f158

  • Switch between multiple lighting modes with your choice.
  • Rich lamplight atmosphere, give you more pure and fresh sense, available in dimmer & night light mode options
  • Brightness and colour temperature dimmable & adjustable from warm white 3000K to cool/cold white 6500K
  • Customize your colourful life, 16 million color saturation changes, make life full of beauty
  • Home or Away lighting mode, to remote control the smart LED bulb even away from home, to ensure the safety of your home

Rainbow of colors

The color temperature of the light is from 2000k to 6500k (RGB+CCT). More than 16 million color choices and all of them are dimmable. You can easily set the color to suit your mood with dimmable brightness. Brighten up the room or create a relaxing environment by dimming the light. 

e4bc028d 6e9f 41c2 ba62 4f9175f05b0e

 

6ce8ed9e aff9 4b8c b985 f7df27d2b721

H81fd6197ce1c40db8c5a5f4725f8c190b

Installation

1.Turn off the Power.
2.Plug in the bulb.
3.Now you can connect it with the gateway.

Connection with Gateway:
1.Start the device searching on the ZigBee Light Link Gateway, it could take some time.
   If the Gateway does not find the device, switch off/on the gateway and try again or
3.The Gateway found your device and you can assign it to the different rooms/zones/groups.
4.Now you can use the device.

Reset
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

H9e132eefb95f4affae886f759f068d1fU

Link & unlink with 2.4GHZ RF Remote Control

How to Link

1. Within 3 seconds after power on, click the “on” button of the group to conduct code matching, and the LED lights turns green, indicating successful code matching.

2. Long press the “off” button of the remote control to enter the night light mode, and the brightness and colour can still be adjusted at this time.
3. Long press the small moon key to enter the 60 seconds delay shutdown state.
4. Long press M key to enter automatic mode.
 

How to unlink

1. If the LED is still connected to the ZigBee gateway, long press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current colour.
2. If the LED is not connected to the ZigBee gateway status, on press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times.

H9e132eefb95f4affae886f759f068d1fU

Link & unlink with 2.4GHZ RF Remote Control

How to Link

  1. Within 3 seconds after power on, click the “on” button of the group to conduct code matching, and the LED lights turns green, indicating successful code matching.
  2. Long press the “off” button of the remote control to enter the night light mode, and the brightness and colour can still be adjusted at this time.
  3. Long press the small moon key to enter the 60 seconds delay shutdown state.
  4. Long press M key to enter automatic mode.

How to unlink

  1. If the LED is still connected to the ZigBee gateway, long press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current colour.
  2. If the LED is not connected to the ZigBee gateway status, on press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times.

Click on the Whatsapp Icon to ask us any question!
Remember to indicate on the product you are enquiring about.

Categories , Tags , , , ,

Connect with us

Facebook-f Instagram Whatsapp